What is Hydrostatic testing?

Hydrostatic testing is the most commonly used procedure for checking the performance of pressures vessels. This testing is especially brought into play to verify pressure vessels like cylinders, boilers and tubes either they have leaks or manufacturing flaws that may result in leakage.

Hydrostatic testing is significant for safety of pressure vessels and their strength and stability when operating under pressure. This technique is normally utilised under industry requirements or upon customers’ demand or specifications. Usually, there are more chances of leaks in low pressure devices like pipes and plumbing, which are necessary to be identified. For this purpose, the best technique you can go for is hydrostatic testing, not only to detect leaks in pressure vessels, this technique may also be applied for checking proof pressure and burst pressure as well.

Verification of pressure vessel design is suitable for application or not
Procedure of this hydrostatic testing is simple and easy. Incompressible fluids like oil and water are used for this test. The vessel which is to be examined is filled with anyone of these fluids. This test will confirm if there is any leak, manufacturing flaw and/or enduring change in shape of the vessel. In order to make leaks easier to be detected, add red or fluorescent dye in liquid contained in the vessel. As safety factor, pressure applied for the test should always be higher than operating pressure. The safety margin is normally 150% or 5/3 of operating pressure and depends on regulations applied. For instance, if vessel is rated to 2015psi (139 bar) then it should be tested at about 3360psi (232 bar). Water is the most commonly used liquid in hydrostatic testing because it is more incompressible than any other liquid. The vessel which is to be tested is placed in another sealed vessel filled with water. The adjusted internal pressure for a set time period is applied to the test vessel. This subjected pressure result in expansion of test vessel. The overall and permanent expansion of the vessel is then determined. After this, it is inspected physically and visually that the test vessel has been damaged/permanently distorted or remained safe due to test pressure applied on it. For re-verification, the vessel may be subjected to proof-pressure test which is a modified form of hydrostatic test. Procedure of this test is same that of normal hydrostatic test. The only exception is that the test vessel is checked for distortion or malfunctioning during the course of proof-pressure test.

Generally, water jacket test is employed for testing of small pressure vessels. The vessel to be tested is visually inspected for defects and then put in water filled container and by monitoring water level the change in volume of test vessel is measured. The vessel is then pressurized for about 30 seconds. After de-pressurizing, water level is checked which will be raised if vessel distorts due to pressure change and unable to return to original volume.

Take full and appropriate safety measures during and after hydrostatic test execution. The reason behind is use of high pressure in this test. Make it sure that there remained no pressure trapped in the test vessel or pipeline.

FAQs

What is Hydrotest pressure?

When you’re required to pressure test specific pipes and vessels, you’ll most likely be required to carry out a hydrotest.

Also referred to as a hydrostatic test, this is largely considered to be the safest method of pressure testing and identifying potential leaks, strength and structural issues.

What is the Hydrotest pressure for piping?

The hydrotest pressure testing method utilises water to inspect pipe systems for leaks, structural changes and mechanical defects, whilst also ensuring that the piping can operate safety at the optimal level of pressure.

To guarantee the safe operation of piping, however, hydrostatic tests create pressure levels that are noticeably higher than the system’s design capacity.

The precise level of pressure used during hydrostatic testing varies according to the application and its predetermined code. The most commonly used code refers to ASME B31.1 piping systems, and this requires hydrotest pressure of 1.5-times the intended capacity.

What is a hydrostatic water test?       

Whenever you own and operate pressure vessels such as pipelines and gas cylinders, you’ll be required by law to carry out regular pressure tests.

These usually take the form of a hydrostatic test, which utilises water as the testing medium and involves filling the vessel or pipe system in question with the liquid. This will then help to identify any leaks or mechanical deficiencies, whilst a dye can also be added to the water to aid the visual detection of faults.

How is a hydrostatic test performed?

Whilst there are technically two methodologies available to teams who want to pressure test pipelines or vessels, pneumatic tests should only be used in the case of lower pressure applications or where the system’s design does not allow it to be filled with water.

In all other instances, you’ll need to use hydrostatic testing, which is considered to be considerably safer and ideally suited to a far wider range of applications.

But how are hydrostatic tests performed? In simple terms, they require a piping system or vessel to be filled with a largely incompressible liquid (usually water), which is then pressurised to verify the safety of the system, examine for leaks and identify any permanent changes in shape.

What creates hydrostatic pressure?   

Hydrostatic testing is considered to be the industry standard in pressure testing, as it uses a nearly incompressible liquid such as water and can be used safely in high-pressure applications.

With this method, the water is pressurised to a level 1.5-times higher than the test subject’s design capacity. This pressure forces the liquid through the entire system, enabling operators to test its overall performance and identify any potential leaks.

Can hydrostatic testing cause damage?

There’s a good reason why hydrostatic testing is considered to be the industry standard when inspecting pipelines and pressurised vessels. More specifically, this is thought to be far safer than pneumatic testing, which can store far higher levels of energy during the compression of the gas.

As a result, pneumatic testing is far more likely to cause damage to test subject, whereas the hydrostatic method uses a safe and incompressible liquid like water as the inspection medium

Groundforce offers specialist construction solutions. We stock essentials for pipe pressure testing, pipe stoppers, piling equipment, formwork, pump hire, shoring equipment and trenchless technology. Take a look at what we have to offer. Groundforce has over 20 years experience in the construction field and we continue to build on our success. We offer comprehensive technical support for a variety of our products and services. To find out more call us today on 0800 000 345, alternatively, email groundforce@vpplc.com.